Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Accessories/Parts

Stan's NoTubes Rim Tape
$16.00 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's NoTubes Tubeless Valve Stems
$22.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30 Hubs)
$106.00 - $112.00
This ckit converts Stan's NoTubes 3.30 hubs to a Type 2 axle compatible with SRAM's 11-speed mountain cassettes. Each kit includes an XD freehub, spacer, end caps, bearings, and Type 2 axle.
Mavic Flat Carbon Spoke Magnet
$7.90
Tiny yet powerful magnets, compatible with any bike computer, designed to efficiently fit Mavic flat carbon spokes.
Stan's NoTubes Cyclocross Tubeless Kit
$75.00
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Cyclocross Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Cross Country 29er Rim Strip
$23.00
Stan's Cross Country 29er Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Velox Jantex Adhesive Tubular Rim Tape
$12.00
- High performance adhesive tape, a great pairing with Velox Cement - Each roll is usually adequate for gluing two tubular tires - Protects tube from spoke/nipple/rim puncture
Wheels Manufacturing Inc. Outer Axle Nut
$1.00 - $6.00
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
Ritchey Snap-On Rim Strip
$6.00 - $7.00
• Easily snaps over your rims • Stretchy, tightly woven material provides a close fit and protects from abrasion • Sold as a pair • Available for 26-inch, 27.5-inch, 29-inch, and 700c wheels • Not for tubeless set up
SRAM Conversion Cap & XD Driver Body for Roam 60/50 and Rail 50 Wheel
$120.00
Convert your SRAM Roam 60, 50 or Rail 50 wheels to SRAM 11-speed with the XD Driver Body and Axle Cap. XD is a cassette driver body that allows the use of a 10-tooth small cog and provides an improved interface with the cassette. The axle cap is specific to the XD driver and your preferred axle choice.
Mavic 15mm Front Axle Adapter - Crossmax ST/SX
$9.90
On today's MTB forks, there are multiple front axle standards. Mavic front axle adapters allow you to mix and match without replacing wheels/forks. Most Mavic wheels can be fitted with specific adapters to match your fork end dimensions. - Converts Mavic Crossmax ST/SX front hub to use a 15mm axle - One pair of adapters required for each hub to be converted
Mavic 12 > 9.5mm Rear Axle Adapters
$7.90
On today's MTB frames, there are many diameters and width dropouts standards. Most Mavic wheels can be fitted with specific adapters to match with those frames: 142mm extenders for ITS-4 hubs, 142 mm extenders for TS-2 hubs and QR adapters (delivered with a front quick release) for all of them. - Converts a 12mm rear axle to fit in a frame with 9.5mm dropouts - Requires one pair per hub
Mavic XD Freehub Body
$70.00 - $99.95
Mavic's XD freehub body is compatible with all Crossmax and Deemax wheels (2012 and after) or all wheels using TS-2 hubs. This freehub body converts a rear wheel to work with SRAM's XD standard, making the wheel compatible with the XX1 drivetrain. Two kits are available : XD freehub body ITS-4 and XD freehub body TS-2, each with hub-specific parts.
Kinetic Skewer
$14.00
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
Stan's NoTubes Cross Country 29er Tubeless Kit
$75.00
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Cross Country 29er Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Mavic 135 > 142mm Rear Axle Adapters - Crossmax
$29.90
On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Crossmax rear wheels from 135mm to 142mm spacing - One pair required for each hub to be converted
Mavic Tracomp Spoke Removeable Magnet
$7.90
Tiny yet powerful magnets, compatible with any bike computer, designed to efficiently fit Mavic Tracomp carbon spokes.
Mavic Universal Wheel Magnet
$7.90
- Cyclocomputer wheel magnet - Fits most bicycle spokes - For Tracomp carbon spokes found on Mavic wheels, see Tracomp Spoke Removeable Magnet (each sold separately)
Stan's NoTubes All Mountain 29er Tubeless Kit
$95.00
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's All Mountain 29er Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30 Hubs)
$80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Zipp AM Rim Tape
$7.00 - $15.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
Mavic UST Rounded Valve
$14.90 - $16.00
- UST compliant tubeless valve with removable valve core for easy sealant installation. - Mavic recommends that UST valves must be changed once a year to ensure the sealing of the UST systems. Two versions are available: - Round stem compatible with 2012 and beyond Crossmax SLR, ST and SX and 2013 Crosstrail, and: -Square stem for older wheel versions
Syntace X-12 Thru-Axle Axle And Mounting Parts
$5.50 - $45.00
- Syntace x-12 Rear axle standard creates a stiffer and lightweight rear end - Syntace x-12 Parts are only compatible with frames that have Syntace x-12 Dropouts
Stan's NoTubes Alloy Tubeless Valve Stems
$23.00
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
Page 1 of 1